Hood Primary and Secondary Latch Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Front Compartment Front Sight Shield Replacement
1	Hood Primary and Secondary Latch Bolt [2x] CAUTION: Fastener Caution Tighten 9 N.m (80 lb in)
2	Hood Primary and Secondary Latch Procedure Disconnect the release cable from the hood primary latch. Unclip and disconnect the electrical connector.

Callout

Component Name

Hood Primary and Secondary Latch Bolt [2x]

CAUTION:

Tighten
9 N.m (80 lb in)

Hood Primary and Secondary Latch

Procedure