Front Fender Replacement - Right Side

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
CAUTION: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage. Preliminary Procedures Front Fender Upper Rear Molding Replacement Front Bumper Fascia Guide Replacement Rocker Panel Molding Replacement Front Fender Insulator Replacement
1	Headlamp Screw CAUTION: Fastener Caution Tighten 2.5 N.m (22 lb in)
2	Front Fender Bolt [7x] Tighten 9 N.m (80 lb in)
3	Front Fender