Circuit/System Verification
- Ignition - On/Vehicle - In Service Mode
- Verify no other DTCs are set.
- If any other DTCs are set
Diagnose other DTCs first.
- Go to next step: If no other DTCs are set
- If any other DTCs are set
- Verify DTC P0072, P0073, P0074 is not set.
- If DTC P0072, P0073, P0074 is set
Refer to: Circuit/System Testing
- Go to next step: If DTC P0072, P0073, P0074 is not set
- If DTC P0072, P0073, P0074 is set
- Verify the scan tool parameter: Ambient Air Temperature = -40 to 58°C (-40 to 136°F) and changes
- If not between -40 and 57°C (-40 and 134°F) or does not change
Refer to: Circuit/System Testing
- Go to next step: If between -40 and 58°C (-40 and 136°F) and changes
- If not between -40 and 57°C (-40 and 134°F) or does not change
- Refer to: Air Conditioning (A/C) System Performance Test