Instrument Panel Knee Bolster Replacement (Chevrolet)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Instrument Panel Knee Bolster Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . tighten 2.5 N.m (22 lb in)
2	Instrument Panel Knee Bolster Procedure Use a flat bladed plastic trim tool in order to release the retainers securing the knee bolster to the instrument panel assembly. Disconnect the data link connector.

Callout

Component Name

Instrument Panel Knee Bolster Bolt (Qty: 3)

CAUTION:

tighten
2.5 N.m (22 lb in)

Instrument Panel Knee Bolster

Procedure

Use a flat bladed plastic trim tool in order to release the retainers securing the knee bolster to the instrument panel assembly.
Disconnect the data link connector.