X115 Engine Wiring Harness to Forward Lamp Wiring Harness
WARNING: This page is about a different car, the 2022 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
 Courtesy of GENERAL MOTORS COMPANY
|
Connector Part Information
- Harness Type: Engine Wiring Harness
- OEM Connector: 33471-3306
- Service Connector: 84719651
- Description: 3-Way F 1.5 Series, Sealed (BK)
|
Connector Part Information
- Harness Type: Forward Lamp Wiring Harness
- OEM Connector: 33481-0301
- Service Connector: 85005015
- Description: 3-Way M 1.5 MX Series, Sealed (BK)
|
Terminal Part Information
| Terminal Type ID |
Terminated Lead |
Diagnostic Test Probe |
Terminal Removal Tool |
| I |
Not required |
J-35616-14 (GN) |
No Tool Required |
| II |
Not required |
J-35616-3 (GY) |
No Tool Required |
| Pin |
Size |
Color |
Circuit |
Terminal Type ID |
Option |
Function |
Pin |
Size |
Color |
Circuit |
Terminal Type ID |
Option |
| 1 |
0.5 |
WH / RD |
480 |
I |
- |
Engine Control Vehicle Sensors 5 Volt Reference 1 |
1 |
0.5 |
WH / RD |
3201 |
II |
- |
| 2 |
0.5 |
BK / GY |
626 |
I |
- |
Engine Control Vehicle Sensors Low Reference 1 |
2 |
0.5 |
WH / YE |
3202 |
II |
- |
| 3 |
0.5 |
GN |
3057 |
I |
- |
Turbocharger Intake Pressure Sensor Signal Bank 2 |
3 |
0.5 |
YE / WH |
3200 |
II |
- |