X902 Rear License Plate Lamp Wiring Harness to Liftgate Jumper Wiring Harness
WARNING: This page is about a different car, the 2022 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
 Courtesy of GENERAL MOTORS COMPANY
|
Connector Part Information
- Harness Type: Rear License Plate Lamp Wiring Harness
- OEM Connector: 6098-9004
- Service Connector: Service by Harness - See Part Catalog
- Description: 10-Way F 1.2 Series (BK)
|
Connector Part Information
- Harness Type: Liftgate Jumper Wiring Harness
- OEM Connector: 6098-9079
- Service Connector: Service by Harness - See Part Catalog
- Description: 10-Way M 1.2 MCON Series (BK)
|
Terminal Part Information
| Terminal Type ID |
Terminated Lead |
Diagnostic Test Probe |
Terminal Removal Tool |
| I |
Not required |
J-35616-16 (LT GN) |
No Tool Required |
| II |
Not required |
J-35616-17 (LT GN) |
No Tool Required |
| Pin |
Size |
Color |
Circuit |
Terminal Type ID |
Option |
Function |
Pin |
Size |
Color |
Circuit |
Terminal Type ID |
Option |
| 1 |
- |
- |
- |
- |
- |
Not Occupied |
1 |
- |
- |
- |
- |
- |
| 2 |
0.35 |
VT / GY |
539 |
I |
- |
Run/Crank Ignition 1 Voltage |
2 |
0.35 |
VT / GY |
539 |
II |
- |
| 3 |
0.5 |
GN / YE |
6846 |
I |
- |
Rear License Plate Lamp Control |
3 |
0.35 |
GN / YE |
6846 |
II |
- |
| 4 |
0.35 |
GY / YE |
6972 |
I |
- |
Rearview Camera Signal [+] |
4 |
0.35 |
GY / YE |
6972 |
II |
- |
| 5 |
0.35 |
WH / BU |
6973 |
I |
- |
Rearview Camera Signal [-] |
5 |
0.35 |
WH / BU |
6973 |
II |
- |
| 6 |
- |
- |
- |
- |
- |
Not Occupied |
6 |
- |
- |
- |
- |
- |
| 7 |
0.35 |
GN / WH |
24 |
I |
- |
Backup Lamp Control |
7 |
0.35 |
GN / WH |
24 |
II |
- |
| 8 |
0.5 |
BK |
1150 |
I |
- |
Ground |
8 |
0.5 |
BK |
1150 |
II |
- |
| 9 |
0.5 |
GY |
7069 |
I |
- |
Camera Shield Ground Extension |
9 |
0.5 |
GY |
7069 |
II |
- |
| 10 |
0.75 |
BK / WH |
1651 |
I |
- |
Signal Ground |
10 |
0.75 |
BK / WH |
1651 |
II |
- |