Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
For an overview of the component/system, refer to: Exhaust Gas Recirculation (EGR) System Description
| Circuit | Description |
|---|---|
| Signal | The control module input circuit has an internal resistance connected to 2.4 V. |
| Signal | The control module input circuit has an internal resistance connected to 1 V. |
| Component | Description |
|---|---|
| B130 Exhaust Gas Recirculation Temperature Sensor | The temperature sensor is a negative temperature coefficient thermistor, a resistor which changes based on temperature. The input voltage varies depending on the temperature of the sensor. |
| K20 Engine Control Module | The control module contains a microprocessor used to process input data to control outputs. The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly. |