LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe SSV >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Controls And Fuel - 3.0L (Lm2) Diesel - Diagnostic Information And Procedures (2 Of 5)) >> Diagnostic Information and Procedures >> DTC P0403, P0490, P04FA, P1402, P1407, or P140F >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

For an overview of the component/system, refer to: Exhaust Gas Recirculation (EGR) System Description

Circuit Description
Control - Terminal 4 The output circuit is switched from ground to 12 V to activate the component.
Control - Terminal 5 The output circuit is switched from ground to 12 V to activate the component.
Component Description
Q14A Exhaust Gas Recirculation Valve 1 Redirecting the exhaust gas back into the intake system aids in reducing the amount of oxygen that enters the cylinders. This reduces the amount of nitrogen oxide (NOx) that is produced during combustion. The component is actuated by a bidirectional DC motor.
K20 Engine Control Module The control module contains a microprocessor used to process input data to control outputs.
The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly.
scientia non olet · About LEMON Manuals