Installation Procedure

WARNING: This page is about a different variant/trim than selected.

CAUTION:

When installing the Accelerator Pedal do NOT use a mallet or excessive force on the pedal assembly or damage to the pedal assembly could occur, requiring replacement of the pedal assembly.

Courtesy of GENERAL MOTORS COMPANY

Accelerator Pedal (2) - Install

CAUTION:

Refer to Fastener Caution .

Accelerator Pedal Nut (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the accelerator pedal electrical connector (1).
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Insulator (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Insulator Retainer (1) - Install [2x]