Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Emission Reduction Fluid Tank Heat Shield Retainer (1) - Remove [4x]
Emission Reduction Fluid Tank Heat Shield Retainer (1) - Remove [2x]
Emission Reduction Fluid Tank Heat Shield (1) - Remove
Emission Reduction Fluid Tank Filler Vent Hose (1) - Disconnect [2x] - Plastic Collar Quick Connect Fitting Service
- Retainer (2) - Disengage
- Emission Reduction Fluid Tank Filler Vent Hose (1) - Remove