LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe SSV >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Mechanical - 3.0L (Lm2) Diesel - Repair Instructions (5 Of 11)) >> Repair Instructions >> Fuel Pump Access Hole Cover Replacement (4WD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM5207119Courtesy of GENERAL MOTORS COMPANY

    Fuel Pump Access Hole Cover Seal (3) - Install NEW

  2. Fuel Pump Access Hole Cover (2) - Install
  3. CAUTION:

    Refer to Fastener Caution .

  4. Timing Chain Cover Bolt (1) - Install and tighten [2x] - Fastener Specifications
  5. Transmission - Install - Automatic Transmission Removal and Installation (LM2, 4WD and NP0 without F47) , or Automatic Transmission Removal and Installation (LM2, 4WD and NQH without F47) , or Automatic Transmission Removal and Installation (LM2, 4WD and NP0 with F47) , or Automatic Transmission Removal and Installation (LM2, 4WD and NQH with F47)