LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe SSV >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 3.0L (Lm2) Diesel - Repair Instructions (1 Of 11)) >> Repair Instructions >> Crankshaft Pulley Replacement >> Cleaning and Inspection Procedure - Required

Cleaning and Inspection Procedure - Required

WARNING: This page is about a different variant/trim than selected.
  1. GM5845387Courtesy of GENERAL MOTORS COMPANY

    Clean the crankshaft pulley (1).

  2. Inspect the crankshaft pulley (1) for damage to belt drive surface and to crankshaft pulley hub.
  3. Inspect the crankshaft pulley (1) hub groove for damage or wear.
  4. Replace the crankshaft pulley (1) if any damage is found.
scientia non olet · About LEMON Manuals