Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P26C0, P26C2
- DTC P0689, P0690, P11C9, P117A, U111A = Not set
- {P26C0} DTC P118A = Not set
- Engine Block Coolant Valve Position = -5 to 115°
- Ignition and Start Switch = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P29FA, P29FB
- DTC P0689, P0690, P11C9, P117A, U111A = Not set
- {P29FA} Engine Block Coolant Valve Position = Less than -7°
- {P29FB} Engine Block Coolant Valve Position = Greater than 117°
- Ignition and Start Switch = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
U0618, U111A
- Ignition = On
- Ignition and Start Switch = Greater than 11 V
- Power Mode = Run
Frequency the DTC runs = Continuously - After the running conditions are met