Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P2122

Accelerator Pedal Position Sensor = Less than 0.46 V - For greater than 1 s

P2123

Accelerator Pedal Position Sensor = Greater than 4.75 V - For greater than 1 s

P2127

Accelerator Pedal Position Sensor 2 = Less than 0.32 V - For greater than 1 s

P2128

Accelerator Pedal Position Sensor 2 = Greater than 2.6 V - For greater than 1 s

P2138

Accelerator Pedal Position Sensor and Sensor 2 = Not within 5 - 10% of each other - For greater than 1 s