Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P113C, P113D
- { P113C } DTC P2032, P2033 = Not set
- { P113D } DTC P242C, P242D = Not set
- Ignition Off Time For greater than 8 h
- Ignition = On
- Ignition and Start Switch Signal = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P2032, P2033, P242C, P242D
- Ignition = On
- Ignition and Start Switch Signal = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P2084, P242B
- { P2084 } DTC P113C, P2032, P2033, P2085 = Not set
- { P242B } DTC P113D, P242C, P242D, P242E = Not set
- Ignition Off Time For greater than 8 h
- Ignition = On
- Ignition Voltage = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P2085, P242E
- { P2085 } DTC P2032, P2033 = Not set
- { P242E } DTC P242C, P242D = Not set
- Ignition = On
- Ignition Voltage = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met