Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P10C1
Control Circuit = Greater than 8 A - For greater than 3 s
P10EC
Control Circuit = Greater than 6.3 A - For greater than 3 s
P10ED
Control Circuit = Warmer than 170°C (338°F) - For greater than 3 s
P2008
Control Circuit = The control module detects an open circuit. - For greater than 3 s
P2010
Control Circuit = The control module detects a short to voltage. - For greater than 3 s
P201B
Control Circuit = Less than 6 V - For greater than 3 s