Conditions for Running the DTC

P1018, P1019, P131B, P131C, P203C, P203D, P206C, P206D, P2ADB, P2ADC, P2ADD

• DTC P10F4, P20FF, U2627, U2627, U2630 = Not set
• No other DTCs related to the concerned component are set.
• Ignition = On
• Ignition Voltage = Greater than 11 V

Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 4 s

P203B, P206B

• DTC U2627, U2628, U2630 = Not set
• No other DTCs related to the concerned component are set.
• Ignition = On
• Ignition Voltage = Greater than 11 V
• Reductant Level - Calculated = Greater than 5 L (1.3 US Liquid Gal)
• Reductant Tank Heaters = Off
• Reductant Temperature = Greater than 0°C (32°F)
• Vehicle Speed = Less than 2 km/h (1.2 MPH)

Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 200 s

P21C5

• DTC P10C6, P10F4, P20FF, P21CB, U2412, U2626, U2627, U2628, U2630 = Not set
• No other DTCs related to the concerned component are set.
• Ignition = On
• Ignition Voltage = Greater than 11 V
• Reductant Level - Calculated = Greater than 5 L (1.3 US Liquid Gal)
• Reductant Temperature = Greater than 0°C (32°F)
• Vehicle Speed = Greater than 25 km/h (15.5 MPH)

Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 20 s

P2ADA

• DTC P10F4, P20FF, U2627, U2628, U2630 = Not set
• No other DTCs related to the concerned component are set.
• Ignition = Off - For greater than 8 h
• Ignition = On
• Ignition Voltage = Greater than 11 V

Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 3 s

U2627, U2628, U2630

• DTC P10F4, P20FF = Not set
• Ignition = On
• Ignition Voltage = Greater than 11 V

Frequency the DTC runs = Continuously - After the running conditions are met