Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Verify DTC P1018, P1019, P131B, P131C, P203B, P203C, P203D, P206B, P206C, P206D, P21C5, P2ADA, P2ADB, P2ADC, P2ADD, U2627, U2628, U2630 is not set.
- If any of the DTCs are set
Refer to Circuit/System Testing
- Go to next step: If none of the DTC are set
- If any of the DTCs are set
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify that DTCs P1018, P1019, P131B, P131C, P203B, P203C, P203D, P206B, P206C, P206D, P21C5, P2ADA, P2ADB, P2ADC, P2ADD, U2627, U2628, or U2630 are not set.
- If any of the DTCs are set
Refer to Circuit/System Testing
- Go to next step: If no DTC Is set
- If any of the DTCs are set
- All OK.