Removal Procedure
Positive Crankcase Ventilation Tube Connector (1) @ Positive Crankcase Ventilation Fitting - Disconnect and reposition - Plastic Collar Quick Connect Fitting Service
Grasp the valve rocker arm cover insulator (3) and lift up disengaging the 3 upper intake manifold sight shield grommets (2) from the 3 valve rocker arm cover insulator retainers (1).
- Valve Rocker Arm Cover Insulator (3) - Remove
- Inspect the 3 upper intake manifold sight shield grommets (2) on the valve rocker arm cover insulator and replace as necessary.