LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe SSV >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Fuel Tank Filler Pipe Housing Replacement (without LM2) >> Installation Procedure

Installation Procedure

  1. GM5582307Courtesy of GENERAL MOTORS COMPANY

    Fuel Tank Filler Pipe Housing (2) - Install NEW

  2. Press the fuel tank filler pipe housing to the body side outer panel until fully seated (1).
  3. Ensure the fuel tank filler pipe housing seal is full seated to the filler pipe.
  4. GM5582306Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    When replacing the fuel tank filler pipe housing or door, always install NEW fuel labels to the component that was replaced.

    Fuel Tank Filler Door (1) - Install

scientia non olet · About LEMON Manuals