LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe SSV >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Fender Insulator Replacement >> Removal Procedure

Removal Procedure

  1. Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation (Steel Wheel) , or Tire and Wheel Removal and Installation (Aluminum Wheel)
  2. GM5513751Courtesy of GENERAL MOTORS COMPANY

    Front Wheelhouse Liner Bolt (1) - Remove [3x]

  3. GM5513753Courtesy of GENERAL MOTORS COMPANY

    Front Wheelhouse Liner Bolt (1) - Remove [3x]

  4. GM5513756Courtesy of GENERAL MOTORS COMPANY

    Reposition the rear half of the front wheelhouse liner (1).

  5. GM5577805Courtesy of GENERAL MOTORS COMPANY

    Front Fender Insulator Retainer (1) - Remove

  6. Pull the front fender insulator (2) down and out from the front fender.
scientia non olet · About LEMON Manuals