Removal Procedure
Instrument Panel Lower Trim Panel Outer Filler (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Fuse Block Access Hole Cover (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Trim Plate Applique (1) - Remove
Instrument Panel Trim Pad Bolt (1) - Remove [2x]
- Instrument Panel Trim Pad (2) - Remove
- Disconnect the electrical connectors.
Release the retaining tabs.
- Instrument Panel Outer Air Outlet (1) - Remove
Release the retaining tabs.
- Parking Brake Control Switch (1) - Remove
Release the retaining tabs.
- Vehicle Stability Control System Switch (1) @ Instrument Panel Trim Pad - Remove
Release the retaining tabs.
- {If equipped} Head-Up Display Switch (1) - Remove