LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe SSV >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Transmission Shift Opening Cover Replacement >> Removal Procedure

Removal Procedure

  1. GM5518395Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  2. Instrument Panel Fuse Block Access Hole Cover (1) - Remove
  3. GM5519543Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  4. Instrument Panel Trim Plate Applique (1) - Remove
  5. GM5519541Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  6. Instrument Panel Center Trim Plate Applique (1) - Remove
  7. GM5520388Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Upper Trim Panel Bolt (1) - Remove [6x]

  8. Using a flat-bladed plastic trim tool, release the retaining clips.
  9. Disconnect the electrical connector.
    10. NOTE:

    Use care not to bend or deform the thin area of the instrument panel trim pad.

  10. Instrument Panel Trim Pad (2) - Remove
  11. GM5520781Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Center Trim Panel Bolt (1) - Remove [6x]

  12. Disconnect the electrical connectors.
  13. Instrument Panel Transmission Shift Opening Cover (2) - Remove
  14. Transfer components as necessary.
scientia non olet · About LEMON Manuals