LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe SSV >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Lower Trim Panel Replacement - Left Side >> Removal Procedure

Removal Procedure

  1. GM5525884Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  2. Front Floor Console Lower Applique (1) - Remove
  3. GM5525886Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  4. Front Floor Console Applique (1) - Remove
  5. GM5518395Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  6. Instrument Panel Fuse Block Access Hole Cover (1) - Remove
  7. GM5519543Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  8. Instrument Panel Trim Plate Applique (1) - Remove
  9. GM5519541Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  10. Instrument Panel Center Trim Plate Applique (1) - Remove
  11. GM5520388Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Upper Trim Panel Bolt (1) - Remove [6x]

  12. Using a flat-bladed plastic trim tool, release the retaining clips.
  13. Disconnect the electrical connector.
    14. NOTE:

    Use care not to bend or deform the thin area of the instrument panel trim pad.

  14. Instrument Panel Trim Pad (2) - Remove
  15. GM5527231Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  16. Instrument Panel Lower Trim Panel Bolt (1) - Remove
  17. Instrument Panel Lower Center Trim Plate Applique (2) - Remove
  18. GM5515686Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Outer Filler (1) - Remove

  19. GM5517144Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  20. Instrument Panel Fuse Block Access Hole Cover (1) - Remove
  21. GM5517142Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  22. Instrument Panel Trim Plate Applique (1) - Remove
  23. GM5517141Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Trim Pad Bolt (1) - Remove [2x]

  24. Disconnect the electrical connectors.
  25. Instrument Panel Trim Pad (2) - Remove
  26. GM5517140Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Switch Trim Plate Bolt (1) - Remove

  27. Disconnect the electrical connectors.
  28. Instrument Panel Switch Trim Plate (2) - Remove
  29. GM5517088Courtesy of GENERAL MOTORS COMPANY

    Hood Primary Latch Release Cable Handle (1) - Release

  30. Instrument Panel Knee Bolster Bolt (2) - Remove [2x]
  31. GM5515684Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Insulator Retainer (1) - Remove [2x]

  32. GM5515685Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Insulator (1) - Remove

  33. GM5562885Courtesy of GENERAL MOTORS COMPANY

    Release the retaining tab.

  34. Rotate the front floor courtesy lamp (1) a quarter turn counterclockwise to release.
  35. GM5562886Courtesy of GENERAL MOTORS COMPANY

    Front Floor Courtesy Lamp (1) - Remove

  36. Disconnect the electrical connector.
  37. GM5517090Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    You may have to push down on the lower steering column closeout to clear the instrument panel cluster trim plate.

    Instrument Panel Knee Bolster (1) - Remove

  38. GM5542561Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Bolt (1) - Remove [2x]

    39. NOTE:

    Use a plastic trim tool if necessary.

  39. Instrument Panel Lower Trim Panel (2) - Remove
scientia non olet · About LEMON Manuals