Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Knee Bolster (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Instrument Panel Knee Bolster Bolt (2) - Install and tighten [2x] - Fastener Specifications
Hood Primary Latch Release Cable Handle (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connectors.
Instrument Panel Switch Trim Plate (2) - Install
Instrument Panel Switch Trim Plate Bolt (1) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connectors.
Instrument Panel Trim Pad (2) - Install
Instrument Panel Trim Pad Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Trim Plate Applique (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Fuse Block Access Hole Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Outer Filler (1) - Install