Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Outer Filler (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Instrument Panel Fuse Block Access Hole Cover (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Instrument Panel Trim Plate Applique (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Trim Pad Bolt (1) - Remove [2x]
Disconnect the electrical connectors.
Instrument Panel Trim Pad (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Switch Trim Plate Bolt (1) - Remove
Disconnect the electrical connectors.
Instrument Panel Switch Trim Plate (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Hood Primary Latch Release Cable Handle (1) - Release
Instrument Panel Knee Bolster Bolt (2) - Remove [2x]
Disconnect the electrical connector for the front floor courtesy lamp.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
You may have to push down on the lower steering column closeout to clear the instrument panel cluster trim plate.

Instrument Panel Knee Bolster (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Insulator Retainer (1) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Insulator (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Carrier Bolt (1) - Remove [3x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Instrument Panel Driver Knee Bolster Brace Bolt (1) - Remove [4x]

NOTE:

Reposition the instrument panel carrier to access the instrument panel knee bolster deflector.

Instrument Panel Knee Bolster Deflector (2) - Remove