LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe SSV >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Cluster Trim Plate Replacement >> Removal Procedure

Removal Procedure

  1. GM5518395Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  2. Instrument Panel Fuse Block Access Hole Cover (1) - Remove
  3. GM5519543Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  4. Instrument Panel Trim Plate Applique (1) - Remove
  5. GM5519541Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  6. Instrument Panel Center Trim Plate Applique (1) - Remove
  7. GM5520388Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Upper Trim Panel Bolt (1) - Remove [6x]

  8. Using a flat-bladed plastic trim tool, release the retaining clips.
  9. Disconnect the electrical connector.
    10. NOTE:

    Use care not to bend or deform the thin area of the instrument panel trim pad.

  10. Instrument Panel Trim Pad (2) - Remove
  11. GM5515686Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Outer Filler (1) - Remove

  12. GM5517144Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  13. Instrument Panel Fuse Block Access Hole Cover (1) - Remove
  14. GM5517142Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  15. Instrument Panel Trim Plate Applique (1) - Remove
  16. GM5517141Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Trim Pad Bolt (1) - Remove [2x]

  17. Disconnect the electrical connectors.
  18. Instrument Panel Trim Pad (2) - Remove
  19. GM5517140Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Switch Trim Plate Bolt (1) - Remove

  20. Instrument Panel Switch Trim Plate (2) - Remove
  21. Disconnect the electrical connectors.
  22. Extend the steering column to its furthest point to allow the instrument panel steering column upper trim cover to clear the instrument panel.
  23. GM5527241Courtesy of GENERAL MOTORS COMPANY

    Using a small plastic trim tool, separate the instrument panel steering column upper trim cover (1) from the instrument panel steering column lower trim cover.

  24. GM5527242Courtesy of GENERAL MOTORS COMPANY

    Using a small plastic trim tool, separate the instrument panel steering column upper trim cover (1) from the instrument panel steering column opening closeout (2).

  25. GM5520781Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Center Trim Panel Bolt (1) - Remove [6x]

  26. Disconnect the electrical connectors.
  27. Instrument Panel Transmission Shift Opening Cover (2) - Remove
  28. GM5525657Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Some components not shown for graphic clarity.

    Instrument Panel Cluster Trim Plate Bolt (1) - Remove [4x]

  29. GM5525661Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a plastic trim tool if necessary.

    Instrument Panel Cluster Trim Plate (1) - Remove

scientia non olet · About LEMON Manuals