LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe SSV >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Accessory Bezel Replacement >> Removal Procedure

Removal Procedure

  1. GM5573683Courtesy of GENERAL MOTORS COMPANY

    Front Seat (2) - Reposition [2x] - Front Seat Removal and Installation

  2. GM5525884Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  3. Front Floor Console Lower Applique (1) - Remove
  4. GM5525886Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  5. Front Floor Console Applique (1) - Remove
  6. GM5536178Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a flat bladed plastic trim tool.

    Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Remove

  7. Front Floor Console Extension Bolt (2) - Remove
  8. Move the front seat to access the retainers.
  9. Front Floor Console Extension Panel (3) - Remove
  10. GM5536230Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  11. Front Floor Console Bolt Access Hole Cover (1) - Remove
  12. GM5518395Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  13. Instrument Panel Fuse Block Access Hole Cover (1) - Remove
  14. GM5519543Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  15. Instrument Panel Trim Plate Applique (1) - Remove
  16. GM5519541Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  17. Instrument Panel Center Trim Plate Applique (1) - Remove
  18. GM5520388Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Upper Trim Panel Bolt (1) - Remove [6x]

  19. Using a flat-bladed plastic trim tool, release the retaining clips.
  20. Disconnect the electrical connector.
  21. NOTE:

    Use care not to bend or deform the thin area of the instrument panel trim pad.

  22. Instrument Panel Trim Pad (2) - Remove
  23. GM5527231Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Bolt (1) - Remove

  24. Using a flat-bladed plastic trim tool, release the retaining clips.
  25. Instrument Panel Lower Center Trim Plate Applique (2) - Remove
  26. GM5520781Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Center Trim Panel Bolt (1) - Remove [6x]

  27. Disconnect the electrical connectors.
  28. Instrument Panel Transmission Shift Opening Cover (2) - Remove
  29. GM5525885Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  30. Front Floor Console Lower Applique (1) - Remove
  31. GM5525888Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  32. Front Floor Console Applique (1) - Remove
  33. GM5525889Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Bolt (1) - Remove

  34. Using a flat-bladed plastic trim tool, release the retaining clips.
  35. Instrument Panel Lower Center Trim Plate Applique (2) - Remove
  36. GM5536180Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a flat bladed plastic trim tool.

    Front Floor Console Extension Panel (1) - Remove

  37. GM5536231Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  38. Front Floor Console Bolt Access Hole Cover (1) - Remove
  39. GM5539247Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Retainer Bolt (1) - Remove

  40. Front Floor Console Bolt (2) - Remove [2x]
  41. GM5539246Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Bolt (1) - Remove [2x]

  42. Front Floor Console Retainer Bolt (2) - Remove
  43. GM5539248Courtesy of GENERAL MOTORS COMPANY

    Slide the front floor console (1) back to clear the instrument panel accessory bezel.

  44. GM5539609Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Accessory Bezel Bolt (1) - Remove [4x]

  45. NOTE:

    Use a plastic trim tool if necessary.

  46. Instrument Panel Accessory Bezel (2) - Remove
  47. Disconnect the electrical connectors.
  48. Transfer components as necessary.