Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Lower Applique (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Applique (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Use a flat bladed plastic trim tool.

Move the front seat to access the retainers.
Front Floor Console Extension Panel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Bolt Access Hole Cover (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
You may have to slide the armrest back to better access the retainers.

Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Rear Trim Lower Panel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Disconnect and reposition harness as necessary.
Front Floor Rear Console Side Trim Panel (1) - Remove