LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe SSV >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Front Floor Console Wiring Harness Replacement (D07) >> Removal Procedure

Removal Procedure

  1. GM5573683Courtesy of GENERAL MOTORS COMPANY

    Front Seat (2) - Remove (2) - Front Seat Removal and Installation

  2. GM5525884Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  3. Front Floor Console Lower Applique (1) - Remove
  4. GM5525886Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  5. Front Floor Console Applique (1) - Remove
  6. GM5536178Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a flat bladed plastic trim tool.

    Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Remove

  7. Front Floor Console Extension Bolt (2) - Remove
  8. Front Floor Console Extension Panel (3) - Remove
  9. GM5536230Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  10. Front Floor Console Bolt Access Hole Cover (1) - Remove
  11. GM5525885Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  12. Front Floor Console Lower Applique (1) - Remove
  13. GM5525888Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  14. Front Floor Console Applique (1) - Remove
  15. GM5536180Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a flat bladed plastic trim tool.

    Front Floor Console Extension Panel (1) - Remove

  16. GM5536231Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  17. Front Floor Console Bolt Access Hole Cover (1) - Remove
  18. GM5567772Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Retainer Bolt (1) - Remove [2x]

  19. Front Floor Console Bolt (2) - Remove [4x]
  20. Disconnect and reposition harness as necessary.
  21. GM5567773Courtesy of GENERAL MOTORS COMPANY

    Remove the front floor console (1) from the vehicle with the aid of an assistant.

  22. GM5536447Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Rear Cup Holder Liner (1) - Remove

  23. Front Floor Console Cup Holder Bolt (2) - Remove
  24. Using a flat-bladed plastic trim tool, release the retaining clips.
  25. Front Floor Console Rear Cup Holder (3) - Remove
  26. GM5549536Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Rear Cover Bolt (1) - Remove

  27. Using a flat-bladed plastic trim tool, release the retaining clips.
  28. Front Floor Console Rear Trim Panel (2) - Remove
  29. Disconnect the electrical connectors.
  30. GM5554519Courtesy of GENERAL MOTORS COMPANY

    Using a suitable plastic trim tool, release the retaining tabs.

  31. Front Floor Rear Console Side Trim Panel (1) - Remove
  32. GM5562779Courtesy of GENERAL MOTORS COMPANY

    Pull up on the rear of the front floor console cup holder trim plate (1) to start to release the retainer clips and work your way forward.

  33. Disconnect the electrical connectors.
  34. Front Floor Console Cup Holder Trim Plate (1) - Remove
  35. GM5573731Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Quantity of clips and routing of the front floor console wiring harness may vary based on option content.

    Release the wiring harness clips and remove the front floor console wiring harness (1).

  36. GM5573732Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Quantity of clips and routing of the front floor console wiring harness may vary based on option content.

    Release the wiring harness clips and remove the front floor console wiring harness (1).

  37. GM5573733Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Quantity of clips and routing of the front floor console wiring harness may vary based on option content.

    Release the wiring harness clips and remove the front floor console wiring harness (1).