Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Connect the electrical connectors.
Front Floor Console Cup Holder Trim Plate (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Stowage Tray (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Front Floor Console Storage Tray Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Storage Tray Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect and position the wiring harness.
Front Floor Rear Console Side Trim Panel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Bolt Access Hole Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Extension Panel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Applique (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Lower Applique (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Rear Console Side Trim Panel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Trim Lower Panel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Bolt Access Hole Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Extension Panel (3) - Install
Front Floor Console Extension Bolt (2) - Install and tighten - Fastener Specifications
Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Applique (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Lower Applique (1) - Install
Return the armrest compartment to the close position.
Return the seat to its original position.