Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Cup Holder Liner (1) - Remove
Front Floor Console Cup Holder Bolt (2) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Rear Cup Holder (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Cover Bolt (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Rear Trim Panel (2) - Reposition
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Disconnect the front floor console bin lamp connector (1).
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Use a suitable tool.

Front Floor Console Armrest Hinge Clip (1) - Remove

WARNING:

The armrest hinge springs are under pressure. Remove the pivot pin carefully in order to avoid bodily injury.

Front Floor Console Armrest Pivot Pin (2) - Remove
Front Floor Console Armrest (3) - Reposition
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Front Floor Console Compartment Liner (1) - Remove
Front Floor Console Bracket Bolt (2) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Compartment (1) - Remove