Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Compartment (1) - Install
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

CAUTION:
Refer to Fastener Caution .

Front Floor Console Bracket Bolt (2) - Install and tighten [4x] - Fastener Specifications
Front Floor Console Compartment Liner (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Armrest (3) - Install
Front Floor Console Armrest Pivot Pin (2) - Install
Front Floor Console Armrest Hinge Clip (1) - Install
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Connect the front floor console bin lamp connector (1).
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Trim Panel (2) - Install
Front Floor Console Rear Cover Bolt (1) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Cup Holder (3) - Install
Front Floor Console Cup Holder Bolt (2) - Install and tighten - Fastener Specifications

NOTE:

Make sure the liner is properly seated under the front floor console compartment bezel.