LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe SSV >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Front Floor Console Carrier Replacement (DCH) >> Removal Procedure

Removal Procedure

  1. GM5525884Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  2. Front Floor Console Lower Applique (1) - Remove
  3. GM5525886Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  4. Front Floor Console Applique (1) - Remove
  5. GM5536178Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a flat bladed plastic trim tool.

    Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Remove

  6. Front Floor Console Extension Bolt (2) - Remove
  7. Move the front seat to access the retainers.
  8. Front Floor Console Extension Panel (3) - Remove
  9. GM5536230Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  10. Front Floor Console Bolt Access Hole Cover (1) - Remove
  11. GM5537637Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    You may have to slide the armrest back to better access the retainers.

    Using a flat-bladed plastic trim tool, release the retaining clips.

  12. Front Floor Console Rear Trim Lower Panel (1) - Remove
  13. GM5537709Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  14. Front Floor Rear Console Side Trim Panel (1) - Remove
  15. GM5525885Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  16. Front Floor Console Lower Applique (1) - Remove
  17. GM5525888Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  18. Front Floor Console Applique (1) - Remove
  19. GM5536180Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a flat bladed plastic trim tool.

    Move the front seat to access the retainers.

  20. Front Floor Console Extension Panel (1) - Remove
  21. GM5536231Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  22. Front Floor Console Bolt Access Hole Cover (1) - Remove
  23. GM5537710Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  24. Disconnect and reposition harness as necessary.
  25. Front Floor Rear Console Side Trim Panel (1) - Remove
  26. GM6017801Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Storage Tray Bolt (1) - Remove [2x]

  27. GM6017803Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Storage Tray Bolt (1) - Remove [2x]

  28. GM6017807Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Stowage Tray (1) - Reposition

  29. GM5552325Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Some components not shown for graphic clarity.

    Pull up on the rear of the front floor console cup holder trim plate (1) to start to release the retainer clips and work your way forward.

  30. Disconnect the electrical connectors.
  31. Front Floor Console Cup Holder Trim Plate (1) - Remove
  32. GM6018007Courtesy of GENERAL MOTORS COMPANY

    Disconnect and reposition harness as necessary.

  33. Front Floor Console Retainer Bolt (1) - Remove [2x]
  34. Front Floor Console Intermediate Bracket Bolt (2) - Remove [4x]
  35. Front Floor Console Carrier (3) - Remove
  36. GM5607920Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Auxiliary Cooling Duct Retainer (1) - Remove

  37. Front Floor Console Auxiliary Cooling Intermediate Duct (2) - Remove
scientia non olet · About LEMON Manuals