LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Controls And Fuel - 3.0L (Lm2) Diesel - Repair Instructions (2 Of 2)) >> Repair Instructions >> High Pressure Diesel Fuel Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
GM5149834Courtesy of GENERAL MOTORS COMPANY
  1. High Pressure Diesel Fuel Sensor (1) - Install and tighten - Fastener Specifications
  2. Connect the high pressure diesel fuel sensor electrical connector.
  3. GM5211335Courtesy of GENERAL MOTORS COMPANY

    Charge Air Cooler Outlet Air Hose (2) - Install

  4. CAUTION:

    Refer to Fastener Caution .

  5. Charge Air Cooler Outlet Air Hose Clamp (1) - Tighten [2x] - Fastener Specifications
  6. GM5171779Courtesy of GENERAL MOTORS COMPANY

    Oil Filler Cap - Remove

  7. Intake Manifold Cover (2) - Install
  8. Intake Manifold Cover Bolt (1) - Install and tighten - Fastener Specifications
  9. Oil Filler Cap - Install
  10. Prime the fuel system and inspect for leaks. Fuel System Priming