LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Controls And Fuel - 3.0L (Lm2) Diesel - Repair Instructions (2 Of 2)) >> Repair Instructions >> Exhaust Particulate Matter Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. GM5615363Courtesy of GENERAL MOTORS COMPANY

    Disconnect the exhaust particulate matter sensor electrical connector

  3. Exhaust Particulate Sensor Bolt (1) - Remove
  4. Nitrogen Oxides Sensor Nut (2) - Remove
  5. Clip (3) @ Exhaust Particulate Matter Sensor - Disengage [2x]
  6. GM5616799Courtesy of GENERAL MOTORS COMPANY

    Clip (1) @ Exhaust Particulate Matter Sensor - Disengage [2x]

  7. GM5616800Courtesy of GENERAL MOTORS COMPANY

    Using a suitable tool, remove the exhaust particulate matter sensor (1).

scientia non olet · About LEMON Manuals