LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Controls And Fuel - 3.0L (Lm2) Diesel - Repair Instructions (2 Of 2)) >> Repair Instructions >> Cylinder Head Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM5144300Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Component Fastener Tightening Caution .

    Cylinder Head Temperature Sensor (1) - Install and tighten - Fastener Specifications

  2. GM5615269Courtesy of GENERAL MOTORS COMPANY

    Connect the cylinder head temperature sensor electrical connector (1).

  3. GM5499646Courtesy of GENERAL MOTORS COMPANY

    Engine Wiring Harness Bracket (3) - Install

  4. Engine Wiring Harness Bracket Nut (1) - Install [2x] - Fastener Specifications
  5. Engine Wiring Harness Bracket Bolt (2) - Install - Fastener Specifications
  6. Oil Filler Cap - Remove
  7. GM5171779Courtesy of GENERAL MOTORS COMPANY

    Intake Manifold Cover (2) - Install

    8. CAUTION:

    Refer to Fastener Caution .

  8. Intake Manifold Cover Bolt (1) - Install and tighten - Fastener Specifications
  9. Oil Filler Cap - Install
scientia non olet · About LEMON Manuals