LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Transfer Case - Mp 3025 (NQH)) >> Repair Instructions - Off Vehicle >> Input Shaft Pilot Bearing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
GM5060160Courtesy of GENERAL MOTORS COMPANY
  1. Using a suitable driver and an arbor press, remove the input shaft pilot bearing (1) by going through the front spline of the input gear.
scientia non olet · About LEMON Manuals