LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Transfer Case - Mp 3025 (NQH)) >> Repair Instructions - Off Vehicle >> Input Shaft Pilot Bearing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
GM5060160Courtesy of GENERAL MOTORS COMPANY
  1. Install the bearing (1) using the small side of the DT-48212  bearing installer (2) and the J-8092  Universal Driver (3).
  2. Press the bearing until the tool bottoms on the input shaft.
scientia non olet · About LEMON Manuals