LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Transfer Case - Mp 3025 (NQH)) >> Repair Instructions - Off Vehicle >> High/Low Shift Fork Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the transfer case high/low shift fork spring assembly (3).
    1. Assemble with the cut corners of the spring assembly facing the shift fork.
    2. Rotate the spring in the bracket to obtain a clear view through the bracket and cam hole to help with installation of the transfer case high/low shift fork pin (1).
  2. Install the transfer case high/low shift fork (2).
  3. Install the transfer case high/low shift fork pin (1)
scientia non olet · About LEMON Manuals