LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Transfer Case - Mp 3015 (NP0)) >> Repair Instructions - Off Vehicle >> Input Shaft Pilot Bearing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM5064165Courtesy of GENERAL MOTORS COMPANY

    Using DT-48212  Input Shaft Pilot Bearing Installer (2), J-8092  Universal Driver (3), and an arbor press, remove the input shaft pilot bearing by going through the front of the input gear.

scientia non olet · About LEMON Manuals