Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
For an overview of the component/system, refer to: Transfer Case Description and Operation
| Circuit | Description |
|---|---|
| 12 V Reference - Terminal B @ A16 Transfer Case Four Wheel Drive Actuator | Regulated voltage supplied by the control module. |
| Control - Terminal C @ A16 Transfer Case Four Wheel Drive Actuator | The output circuit is switched to ground to activate the component. |
| Component | Description |
|---|---|
| A16 Transfer Case Four Wheel Drive Actuator | The motor is bidirectional. |
| K69 Transfer Case Control Module | The control module contains a microprocessor used to process input data to control outputs. |