Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
C115E 12
Control Circuit = Short to Voltage
C115E 11
Voltage = 0 to 0.107 V
C115E 13
Condition 1
Voltage = 0.85 to 1.057 V
Condition 2
Voltage = 0 to 0.107 V
C119E 64
Not plausible conditions, greater than 5 degrees
C119E 98
Control module K69 detects: High Temperature
Actuator temperature stress has exceeded the maximum stress.