Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

C05DD 54, C05DD F3

Ignition = On
System Voltage = 9 to 17.5 V

C05DD 98

Ignition = On
System Voltage = 9 to 17.5 V
Wheel Speed Signal = Valid

C05DD 67

Ignition = On
System Voltage = 9 to 17.5 V
Transfer Case Clutch Torque = Enabled

C05DD F4

Ignition = On
System Voltage = 9 to 17.5 V
Range Actuator Position Sensor - Signal = Valid