Disassemble Procedure
WARNING: This page is about a different variant/trim than selected.
The piston rings are located on the piston in the following order:
- Piston Compression Upper Ring (1)
- Piston Compression Lower Ring (2)
- Piston Oil Ring Rail (3)
Remove piston rings using piston ring pliers (1).
- NOTE:
The mark (3) and the arrow on the top of the piston must point in the same direction.
Piston Pin Retainer (1, 4) - Remove [2x]
- Piston Pin (2) - Remove
- Connecting Rod (5) - Remove