LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical - 3.0L (Lm2) Diesel - Repair Instructions (3 Of 11)) >> Repair Instructions >> Oil Filler Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM5218434Courtesy of GENERAL MOTORS COMPANY

    Oil Filler Tube (3) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Oil Filler Tube Support Stud (2) - Install - Fastener Specifications
  3. Reposition wiring harness and attach retainer to the oil filler tube support stud (2)
  4. GM5203874Courtesy of GENERAL MOTORS COMPANY

    Position the engine wiring harness bracket (3) at the front of the engine, attach retainer at intake manifold, and connect electrical connectors as needed.

  5. Engine Wiring Harness Bracket Bolt (2) - Install and tighten - Fastener Specifications
  6. Engine Wiring Harness Bracket Nut (1) - Install and tighten [2x] - Fastener Specifications
  7. GM5171779Courtesy of GENERAL MOTORS COMPANY

    Intake Manifold Cover (2) - Install

  8. Intake Manifold Cover Bolt (1) - Install - Fastener Specifications
  9. Oil Filler Cap - Install
scientia non olet · About LEMON Manuals