LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2022 >> Tahoe PPV, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Mechanical - 3.0L (Lm2) Diesel - Repair Instructions (1 Of 11)) >> Repair Instructions >> Upper Intake Manifold Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM5187895Courtesy of GENERAL MOTORS COMPANY

    Upper Intake Manifold Bracket (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Upper Intake Manifold Brace Nut (1) - Install and tighten [3x] - Fastener Specifications
  3. GM5385314Courtesy of GENERAL MOTORS COMPANY

    Nitrogen Oxides Sensor (2) - Reposition

  4. Nitrogen Oxides Sensor Nut (1) - Install and tighten [2x] - Fastener Specifications
  5. Oil Filler Cap - Remove
  6. GM5171779Courtesy of GENERAL MOTORS COMPANY

    Intake Manifold Cover (2) - Install

  7. Intake Manifold Cover Bolt (1) - Install and tighten - Fastener Specifications
  8. Oil Filler Cap - Install
scientia non olet · About LEMON Manuals