Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Transmission - Remove - Automatic Transmission Removal and Installation (LM2, 2WD with F47) , or Automatic Transmission Removal and Installation (LM2, 2WD without F47)
- NOTE:
Have an additional technician hold the special tool EN-956-1 Extension in place while breaking loose the automatic transmission flex plate bolts.
Install the EN-49979 Holder (1) with EN-956-1 Extension (3).
Automatic Transmission Flex Plate Bolt (2) - Remove and DISCARD [8x]
- Automatic Transmission Flex Plate (1) - Remove