Component Testing
WARNING: This page is about a different variant/trim than selected.
Static Test
- Ignition/Vehicle - Off
- Disconnect the electrical connector: Q61 Reductant Injector
- Test for 10 to 14 ohms between the test points: Control terminal 1 & Control terminal 2
- If not between 10 and 14 ohms
Replace the component: Q61 Reductant Injector
- Go to next step: If between 10 and 14 ohms
- If not between 10 and 14 ohms
- Test for less than 500 K ohms between the test points: Each terminal of the component & The component's housing
- If 500 K ohms or less
Replace the component: Q61 Reductant Injector
- Go to next step: If greater than 500 K ohms
- If 500 K ohms or less
- All OK.