Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
For an overview of the component/system, refer to: Exhaust Aftertreatment System Description
| Circuit | Description |
|---|---|
| High Control - Terminal 1 | The output circuit is switched to 12 V to activate the component. |
| Low Control - Terminal 2 | The output circuit is switched to ground to activate the component. |
| Component | Description |
|---|---|
| Q61 Reductant Injector | The reductant injector is used to dose and atomize the reductant into the exhaust system. |
| K20 Engine Control Module | The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly. |